Crafco® Solutions

When It Comes To Fixing Cracks, Crafco® Sealants Are The Solution!

Unless fixed early, these cracks will form potholes in a few years, costing 10X more to fix than cracks.

Not all sealants work the same. Selecting the right one for your situation depends on your location, elevation and traffic conditions. With over 100+ variations, Crafco has the sealant formula for your specific need.

Crafco focuses on quality and long-term performance and therefore manufactures products that have a significant service life like hot-applied asphaltic-based crack sealant for asphalt and cold-applied silicone joint sealant that have demonstrated in independent studies to provide the longest service life available.

HP Asphalt Cold Patch™ – The Year Round,
All Season, High-Performance Cold Patch

Whether it’s repairing utility cuts or patching reoccurring potholes, HP Asphalt Cold Patch is rapidly becoming the material of choice. HP Asphalt Cold Patch is approved as a high-performance patching material in most states and other user agencies within the United States. HP Asphalt Cold Patch is specifically formulated for wide-ranging temperature and climate.  HP Asphalt Cold Patch is permanent, fully guaranteed against any failure, comes in an easy-to-open bag, and most important, does the job right the first time.

Key Benefits of HP Asphalt Cold Patch™ include:

  • Works in all weather conditions: wet, cold or hot
  • Approved, used and tested by utilities and states nationwide
  • Easy to use bags prevent waste and save money
  • No mixing, mechanical compaction or tacking
  • Cost effective with no messy clean-up or time constraints
  • Adheres to asphalt, concrete or steel
  • Perfect for bridge, drain, utility cuts and cutter work
  • Patch will not release, eliminates milling before repaving
  • Proven non-hazardous
  • For use in all seasons

Deery 180 & 200 Hot Sealants

Both are Hot Applied Sealants containing a single component, elastically modified composition of asphalt cement, virgin synthetic polymer, recycled rubber, and other modifiers. The sealant contains no solvent, is pre-reacted and conforms to the requirements of the specification designated herein and conforms to the requirements.

A moderately high viscosity pavement preservation sealant intended for highway, street and aviation applications for sealing longitudinal and transverse joints and random cracks in Asphalt or Concrete pavements where use of high levels of recycled material is desirable. Properly installed, DEERY Hot Applied Sealant is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and moderate low pavement temperatures. VOC=0 g/l. Meets requirements of ASTM D5078. Approx. 30 lb./pkg., sold by the pound.

PolyFlex Type 3

Crafco PolyFlex Type 3 is a hot-applied, asphalt based product used to fill cracks and joints in asphalt and Portland cement concrete pavements in moderate to warm climates. PolyFlex Type 3 is specifically formulated to meet Caltrans Standard Specifications 37-5.02 Type 3 for Crack Treatment.  PolyFlex Type 3 is supplied in solid form which when melted and properly applied forms a highly adhesive and flexible compound that resists cracking in the winter and resists flow and pick-up at summer temperatures.

Polyflex Type 3 is used in highway, street, and parking lot pavements and is applied to pavement cracks using either pressure feed melter applicators or pour pots. At application temperature, PolyFlex Type 3 is a medium viscosity product which flows and penetrates cracks. PolyFlex Type 3 is formulated as an economical yet effective pavement maintenance crack filler product. VOC = 0 g/l. Compared to products based on reclaimed rubber, Polyflex Type 3 offers lower viscosity for easier application, improved summer temperature pick-up resistance, quicker set-up times and improved low temperature flexibility.

Roadsaver Low Tack

RoadSaver Low Tack sealant is a single component, hot-applied petroleum based product which is used to fill cracks in both asphalt and Portland cement concrete pavements in moderate to hot climates. RoadSaver Low Tack is supplied in solid form which when melted and properly applied forms a high stiffness, adhesive and flexible compound that resists cracking at winter temperatures and is highly resistant to flow or pick-up at extreme summer temperatures.

RoadSaver Low Tack can be used in highway, street, airfield and parking lot pavements. It can be applied to pavement cracks using either pressure feed melter applicators or pour pots. At application temperature it is a free flowing, self-leveling product. RoadSaver Low Tack is specifically formulated to be a stiff, flow resistant, yet flexible product which is suited for use in areas subject to slow moving vehicle traffic where high resistance to pick-up or tracking is required. VOC = 0 g/l.

Hot-Applied Mastic Sealants- Mastic One®

Crafco Mastic One is designed for large cracks and distressed surface areas too small for re-paving. Ideally used to fill distresses. It is a versatile hot-applied, pourable, self-adhesive ridged asphalt binder containing selected aggregate to ensure good load bearing and skid resistant characteristics. Mastic One is compounded with standard weight aggregate.

Mastic One is a superior repair mastic because:

  • It does not require compaction to achieve 100% density
  • It is flexible and can withstand weather, traffic, and thermal movement
  • It is waterproof and provides an air-tight seal
  • It adheres to both asphalt and concrete surfaces

DEERY Super Gray Hot Applied Sealant

All Crafco products are made to last, but Super Gray’s pure formulation of tough resins and polymer, make it even more durable and higher performing than other sealants. Yet it is very easy to prepare and use.

There is no special equipment or training required — Super Gray is placed using regular Crafco Hot-Pour kettles, heated to the same temperatures, and placed in the same way.

These features, combined with the unique light color, make it an excellent value and a superior, cost-effective product to seal concrete cracks and joints for highway, street, aviation, and parking areas.

Super Gray is available only through CA Certified Small Business Distributors like Main Street Materials. For more information on Super Gray and how it can help Caltrans better seal and fill joints and cracks, contact us today!